DPC Watchdog Violation At Same Point in Boot Handle

DPC Watchdog Violation

Hi blue screen masters. I could utilize some assistance.

The issue: Can’t boot ordinarily – PC solidifies energy lights goes off & leftovers off at opinion where desktop symbols are filling in. Happens each time at about a similar point

Realities: Dell XPS desktop around six years of age, center i7, begun on Win 7, moved up to Win 10×64 about a month prior to the free introduce terminated. Been working fine ‘in the not too distant past. The exact opposite thing I’d done was switch a USB diversion controller starting with one port then onto the next, started Restart, and resigned for night. In sunrise, BOD announcing the DPC Watchdogs Violations. I have not reboot for half a month prior to that. My Win-Ver is 1600 (Founder has not contacted me yet.) Through the “anomalous shutdown course”, I can get to Safe Mode which is altogether steady.

 

Things I’ve done (from experimental mode), with perceptions:

  •  Unplugged all usb gadgets aside from mouse and console.
  •  Did a un-install on both of the usb carters.
  •  Ran SFC scan now. No mistake.
  •  Ran chk dsk C:/f/r No occasion log found (sifted for chk dsk and win in it)
  •  Tried framework reestablish, however got mistake (because of known AppX Staging issue)
  •  Switched the SATA driver to windows nonexclusive.
  •  Switched the video driver to windows nonexclusive.

After doing one of the last two – don’t recollect which – the BSOD quit showing up on typical boot, yet the PC just bites the dust at a similar opinion both stage. Mouse cursors move, and progresses toward becoming “occupied” when glided over the (unfilled) assignment bar, however the drive light remains out. Can just boot from control catch.

After doing one of the last two – don’t recollect which – the BSOD quit showing up on typical boot, yet the PC just bites the dust at a similar opinion both stage. Mouse cursors move, and progresses toward becoming “occupied” when glided over the (unfilled) assignment bar, however the drive light remains out. Can just boot from control catch.

  •  Uninstalled Panda antivirus, in any event to the extent it would go from experimental mode. Not certain if the required reboot totally cleared it, and couldn’t run the bland expulsion instrument from the Panda site in Safe Mode.
  •  Tried to begin Windows Security benefit however it wont begin in Safe Mode (despite the fact that the administrations on which it depends are said to be running.) Now I don’t know whether it’s sheltered to do a protected mode with web.
  •  Spoke with three distinct individuals at Microsoft Support. None seemed acquainted with DPC Watchdog Violation and needed to find it. They experienced basic scripts with me, however in end alluded me either to a Win 10 reinstall or an administration specialist. I’m truly attempting to keep away from both of those. Got my eye on another PC, and in case will need to reinstall all my stuff – quite a bit of it with licenses – would rather just experience that once.
  •  I set the landfill office to full bit dump, and I know you all might want to see that. I’m set up to show myself how to introduce and utilize the debugger, yet here’s the thing: in my Windows registry, the document MEMORY.DMP is dated a year back July. ie. It shows up no dump is happening. Is that a piece of information?
  •  I have a moment interior hard drive (non bootable) and am running chkdsk/f/r on it now, in the event that something goes wrong. Try not to anticipate that that will change the photo.

Alter – No record structure issue and no terrible segment, and the log does show up in the Event Editor, which abandons me pondering harder why chkdsk C:/f/r did NOT leave an occasion log?

I’m set up to acknowledge that the boot drive is terrible in spite of above endeavors – I have Acronis and Macrium reinforcements – however would that clarify why the stop happens in pretty much a similar detect each time?

Obviously this is baffling. I’d value any assistance or counsel. Be happy to supply extra data if educated on the most proficient method to procure it. Much obliged, – Ron

Alter – I just idea of something else in the event that it’s pertinent. There’s a front board on the Dell with a few USB ports and a SD card peruser. The ports quit working couple years prior, so I’ve recently been utilizing those on the top or back of the case. Be that as it may, just as of late, presumably after the last typical boot, the card peruser quit working too. Is there something I ought to do to guarantee the boot procedure is not attempting to “peruse from that transport” (or whatever the correct wording)?